Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-05-18 15:00:17

prox_students
Contributor
Registered: 2019-01-27
Posts: 20

cp1000d

Hi,

Does anybody hold cp1000d by any chance?

Last edited by prox_students (2019-07-13 16:49:04)

Offline

#2 2019-05-21 00:45:14

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 632

Re: cp1000d

I'm not sure where the 'D' comes from or if it differs from what I have. The encoder I use is an Omnikey 5427UE. If this device is no different from the cp1000d then perhaps I can help?
The hardware is certainly capable of re-programming iClass tags. I do this often using my own software and firmware.

It is not possible to create identical cards using the CP1000 as it is incapable of changing the UID.

Offline

#3 2019-05-31 15:07:41

prox_students
Contributor
Registered: 2019-01-27
Posts: 20

Re: cp1000d

Hi 0xFFFF,

Thanks for your input ! 'D' just indicates it's a desktop version, so it's identical to regular cp1000.

How are the software and firmware provided by HID? May I ask the reason why you are using your own firmware and software ?

And can I contact you via email?  Unfortunately, I have no idea what your modhex address that you put on your profile is..

Thanks !

Last edited by prox_students (2019-07-13 16:49:36)

Offline

#4 2019-06-03 00:36:14

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 632

Re: cp1000d

Oh OK. I suppose I have a 'D' version too then.
HID and the stupid naming conventions!

The CP1000 can read, program and re-program iClass or iClass SE (blank, configured or pre-programmed).
The software can be downloaded from the HID Drivers & Downloads page.
Can't recall if the firmware is contained within the AsureID installer or is downloaded by it. Either way, if you decompile it you can find out for yourself.

prox_students wrote:

May I ask the reason why you are using your own firmware and software?

The software and hardware solutions offered today are woefully inadequate.

prox_students wrote:

And can I contact you via email?  Unfortunately, I have no idea what your modhex address that you put on your profile is..

Easy... decode it here: Card Info.

prox_students wrote:

Thanks !

You're welcome smile

Offline

Board footer

Powered by FluxBB