Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#51 2017-02-24 06:03:12

my_fair_cats_sick
Contributor
Registered: 2016-03-15
Posts: 81

Re: [FINISHED] Changes to: HF MFU INFO

Is there any reliable/known way to check that there is a lockout on faulty auths?  I know brute-forcing 8 bytes is logically stupid in this case due to auth physical timing to the card, because even with dumb luck for one tag its not repeatable.  I was hoping there is some way to do this many times similar to how hard-nested attack found a way to only do a portion of the auth sequence to get the data necessary, maybe there are some bytes that come that wouldn't normally when a correct key is provided...I guess I need to read the specs and try and see if anything is possible.

Offline

#52 2017-02-24 06:20:34

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: [FINISHED] Changes to: HF MFU INFO

if the tag is locked well you won't know if it has the lockout after x faulty auths turned on or not.  (the info cmd would tell you if it can read it.)

Offline

Board footer

Powered by FluxBB