Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2009-10-23 16:19:24
- thefkboss
- Contributor
- Registered: 2008-10-26
- Posts: 198
i have problems with my new proxmark3
hi
i´m newbe.
i tray to snoop the speak between mifare clasicc and a reader.
first i have this values of tune
# LF antenna @ 23 mA / 29943 mV [1273 ohms] 125Khz
# LF antenna @ 24 mA / 29138 mV [1187 ohms] 134Khz
# HF antenna @ 2 mA / 515 mV [235 ohms] 13.56Mhz
i don´t know if they are good or not
i open the console and i write
> hi14asnoop
the yellow led bright but don´t blink i wait time and the led stay the same, so i press the boton
and
#db# 00000002, 00000000, 00000000
#db# 00000020, 00000000, 000000aa
then i write
hi14alist
and it show me
recorded activity:
ETU :rssi: who bytes
---------+----+----+-----------
what i´m doing wrong??
is an antenna problem??
thanks
Offline
#2 2009-10-23 18:25:34
- cybergibbons
- Member
- Registered: 2009-10-02
- Posts: 9
Re: i have problems with my new proxmark3
There's something not right with the HF antenna - you should be looking for at least 12V on it.
Offline
#3 2009-10-23 21:38:46
- rleroy
- Contributor
- From: Between a REQB and a ATQB
- Registered: 2009-03-04
- Posts: 61
Re: i have problems with my new proxmark3
From your antenna reading, it looks like you have hooked up the wrong kind of antenna.
You hooked up a LF 125khz antenna, but Mifare works with a HF 13.56mhz antenna.
Offline
#4 2009-10-25 22:43:42
- thefkboss
- Contributor
- Registered: 2008-10-26
- Posts: 198
Re: i have problems with my new proxmark3
so
you think that is only an antenna problem.
if i solve this problem it will work???
this
the yellow led bright but don´t blink i wait time and the led stay the same, so i press the boton
and
#db# 00000002, 00000000, 00000000
#db# 00000020, 00000000, 000000aa
then i write
hi14alist
and it show me
recorded activity:
ETU :rssi: who bytes
---------+----+----+-----------
is also a part of the antenna problem . Am i right???
thanks
Offline
#5 2009-10-26 08:34:36
- rule
- Member
- Registered: 2008-05-21
- Posts: 417
Re: i have problems with my new proxmark3
yes 
Offline
#6 2009-10-26 13:45:01
- thefkboss
- Contributor
- Registered: 2008-10-26
- Posts: 198
Re: i have problems with my new proxmark3
ok thanks
i will try 
Last edited by thefkboss (2009-10-26 13:45:12)
Offline
#7 2009-10-27 21:46:13
- thefkboss
- Contributor
- Registered: 2008-10-26
- Posts: 198
Re: i have problems with my new proxmark3
now it works perfect.
it was the antenna problem
thanks
Offline