Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I'm pretty new to the Proxmark - but been around wireless communications / etc programming and such for years (xbees / etc). Wanted to get into NFC more for my home automation and of course, I cant leave it at just that, love to learn more and more ....
So, to my question - I'm trying to sniff some hf communication but having no luck, PM3 is running latest FW:
Prox/RFID mark3 RFID instrument
bootrom: /-suspect 2015-11-04 22:15:34
os: /-suspect 2015-11-04 22:15:41
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at 9: 8: 8
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 171796 bytes (33%). Free: 352492 bytes (67%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
When I execute the hf snoop command, it doesn't capture anything and doesn't "lock", it just does this :
proxmark3> hf snoop
#db# Skipping first 0 sample pairs, Skipping 0 triggers.
proxmark3>
or:
proxmark3> hf snoop 10000 1
#db# Skipping first 10000 sample pairs, Skipping 1 triggers.
proxmark3>
proxmark3.exe is dated 11/4/2015 and should match the 2.4.0 on the PM3.
Antenna is good - but I'm just having no luck at all .... I'm guessing I'm missing something easy - but just cant seem to figure it out .... any ideas?
Thanks
Offline
Ok, figured it out - I thought it should sit there, but I just tried a snoop and placed the antenna between the reader and nfc tag and then pressed the PM3 button to stop and it collected data.... So I think that's all good now.
Is there a way to save the output from hf list 14a?
Offline
Ok, its in the log file ... sorry for the double replies to my own post - no edit feature in the forum???
Offline
Pages: 1