Proxmark3 community

dod

Contributor

Registered: 2019-10-08

Posts: 2

[RDV4] Brand new User bricked already ?

I purchased a new proxmark3 elechouse RDV2
I followed this guide linked below using a colleagues windows box thinking it would be the safest way to load iceman firmware

https://lab401.com/blogs/academy/proxmark-3-using-custom-firmware

We loaded the latest iceman version and I thought all was well as it worked on his machine
now as a mac user I did

brew tap RfidResearchGroup/proxmark3
export HOMEBREW_PROXMARK3_PLATFORM=PM3OTHER
brew install --HEAD proxmark3
proxmark3 /dev/tty.usbmodem88881

I get the following output

dod$ proxmark3 /dev/tty.usbmodem88881
[=] Session log /Users/dod/.proxmark3/log_20191008.txt

         
██████╗ ███╗   ███╗ ████╗      ...iceman fork         
██╔══██╗████╗ ████║   ══█║       ...dedicated to RDV40           
██████╔╝██╔████╔██║ ████╔╝           
██╔═══╝ ██║╚██╔╝██║   ══█║     iceman@icesql.net         
██║     ██║ ╚═╝ ██║ ████╔╝    https://github.com/rfidresearchgroup/proxmark3/         
╚═╝     ╚═╝     ╚═╝ ╚═══╝  pre-release v4.0         

Support iceman on patreon - https://www.patreon.com/iceman1001/         
                 on paypal - https://www.paypal.me/iceman1001         

         
[=] Using UART port /dev/tty.usbmodem88881           
unknown command:: 0x61334d50

[!!] ERROR: cannot communicate with the Proxmark

checking usb i get

system_profiler SPUSBDataType

        proxmark3:

          Product ID: 0x4b8f
          Vendor ID: 0x9ac4
          Version: 1.00
          Serial Number: 8888
          Speed: Up to 12 Mb/sec
          Manufacturer: proxmark.org
          Location ID: 0x14200000 / 12
          Current Available (mA): 500
          Current Required (mA): 500
          Extra Operating Current (mA): 0

trying to flash

iMac:~ dod$ pm3-flash-fullimage
[=] Waiting for Proxmark3 to appear...
[=] Session log /Users/dod/.proxmark3/log_20191008.txt
[+] About to use the following file:         
[+]     /usr/local/Cellar/proxmark3/HEAD-04ce6c6/bin/../share/proxmark3/firmware/fullimage.elf         
[+] Waiting for Proxmark3 to appear on /dev/tty.usbmodem88881           
.Found           
[+] Entering bootloader...           
[+] (Press and release the button only to abort )         
[+] Waiting for Proxmark3 to appear on /dev/tty.usbmodem88881           
............................................................         
[!] ERROR: invalid serial port /dev/tty.usbmodem88881
         
[!!] Error: Proxmark3 not found.         
[!] Sending bytes to Proxmark3 failed.offline           
[+] All done.           

Have a nice day!

Any ideas?

running screen on the tty pressing the button with a hid card gives

unknown command:: 0x84c4033funknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c40364unknown command:: 0x84c4030dunknown command:: 0x84c4033funknown command:: 0x84c40377unknown command:: 0x84c4030dunknown command:: 0x84c40371unknown command:: 0x84c4030dunknown command:: 0x84c4033funknown command:: 0x84c40368unknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c4030dunknown command:: 0x84c4030d"Stand-alone mode! No PC necessary.[+] playing[+] 0 18240 0020fd60?[!] tags can only have 44 bits. - USE lf simfsk for larger tags[!] simulation finished[+] done playing[+] playing[+] 1 1 fffffd40[!] simulation finished[+] done playing[+] starting recordingDTAG ID: 2007402227 (4371) - Format Len: 26bit - FC: 160 - Card: 4371Stopped[+] recorded 0 20 07402227[+] playing[+] 0 20 07402227[!] simulation finished[+] done playing[+] playing[+] 1 1 fffffd40[!] simulation finished[+] done playing

Last edited by dod (2019-10-08 20:44:37)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,506

Website

Re: [RDV4] Brand new User bricked already ?

The troubleshooting guide at the repo usuall is a good starting place when things goes wrong.
https://github.com/RfidResearchGroup/pr … hooting.md

In your case I would say you need to take notice on the serial port.  Running latest RRG/Iceman usually gives a different serial port enumeration.

Since you are swapping between repos,  you will need to update bootrom first.  ie   flash-bootrom ,  reset device,  flash-fullimage.

Sometimes its easier to use the button trick when doing this.