Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-04-18 05:39:49

cds333
Contributor
Registered: 2019-04-06
Posts: 18

[solved] Switch LF to HF & a working rdv4 mfu standalone?

So I finally got my rdv4 working properly with reading and simming UL tags by flashing the RRG build; but now the standalone mode is set to LF, therefore useless for UL!

I have read about changing a line in the makefile to switch from LF to HF mode in standalone but I dont see that in the RRG build.

Does anyone know how to do that?

Or if that is not possible- can anyone just point me to a build that works with Ultralight in standalone mode on the RDV4?

(I have already read iceman's post in the FAQ section about expoitagency but the HF firmware there is like 2-3 years old and I am using an RDV4)

Thanks!!!

Last edited by cds333 (2019-04-19 08:00:57)

Offline

#2 2019-04-18 07:36:17

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] Switch LF to HF & a working rdv4 mfu standalone?

Offline

#3 2019-04-19 07:58:13

cds333
Contributor
Registered: 2019-04-06
Posts: 18

Re: [solved] Switch LF to HF & a working rdv4 mfu standalone?

Excellent. I was looking in the wrong makefile!

So far I have tried both HF_MATTYRUN and HF_YOUNG; matty would not compile, however young seems to work great with both 1K and Ultralight

Thank You!!!

Offline

#4 2019-04-19 08:26:41

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] Switch LF to HF & a working rdv4 mfu standalone?

Fixed it,  try pull latest source and compile with HF_MATTYRUN.

Offline

Board footer

Powered by FluxBB