Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-02-06 13:47:40

johnthewave
Contributor
Registered: 2014-10-10
Posts: 19

cloning indala flexpass 224 onto ATA5577

Dear all,
I'm using proxmark3 V2 bought from elechouse. (FYI, it has a lot of instabilities under WIN7 and lf antenna).
" lf search u" gives me Indala 224 vlid Indala ID Found !
" lf Indala clone l 800000................ef3" does nothing clean. Log is : Cloning 224bit tag with UID 00000.....000000
Only zeros.

What could I do ?
Thanks. John.

Offline

#2 2019-02-06 14:34:00

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: cloning indala flexpass 224 onto ATA5577

Update it?   Compile/flash the latest code from offical github repo.

Offline

#3 2019-02-06 19:09:39

johnthewave
Contributor
Registered: 2014-10-10
Posts: 19

Re: cloning indala flexpass 224 onto ATA5577

Iceman, I'm re-installing everything according to your wiki Windows page. I saw several errors when running runme64.bat. I saw an error about a key not being able to be retrieved from a server. Some files missing too. The make created no errors.
When typing ./client/flasher com6 -b ./bootrom/obj/bootrom.elf, I get the following result :
Loading ELF file etc. and the segments 0x001000 etc
Waiting for Proxmark to appear on com6.
Found
Entering bootlaoder...  (windows 'ding dong' signaling device pulugged out / in)
Waiting for Proxmark to appear on com6 ..............
ERROR : invalide serial port
error : Proxmark not found.

Repeating the operation : but instead of waiting all "....", i unplugged and plugged again the reader. Then it went 1 step further, "found . Note : your bootloader does not understand the new START-FLASH command.
Flashing ......
Writing segment for file ;.bootrom.obj.bootrom.elf   1 block . Waiting for a response from the proxmark .... and then "You can cancelet ... and nothing more. I think all is frozen now.

I have had same issue with lab401 instal.
What should I do next ? Thanks.  John

Offline

#4 2019-02-06 19:27:48

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: cloning indala flexpass 224 onto ATA5577

now that is not a question about indala flexpass,   that would be a question about how proxspace environment failed to install.
I remember seen somewhere on the forum about 64 bit proxspace issues.  Somewhere under windows client section. I suggest you start there

Offline

#5 2019-02-06 19:33:20

johnthewave
Contributor
Registered: 2014-10-10
Posts: 19

Re: cloning indala flexpass 224 onto ATA5577

hw version :
bootrom: master/v3.1.0-56-g97096af-dirty-suspect 2019-02-03
os : /-suspect 2015-11-19
LF FPGA image built for 2s30vq100 on 2015/03/06 etc.
I have ordered it Date Ordered: Monday 26 February, 2018 from elechouse.com.

Offline

#6 2019-02-06 22:07:19

johnthewave
Contributor
Registered: 2014-10-10
Posts: 19

Re: cloning indala flexpass 224 onto ATA5577

Ok, I have moved to WIN10 and after few issues, newest bootrom and FW is loaded.
I can read the indala tag 224.
I cannot clone, I must do a mistake in the command.
I wrote :
lf indala clone l 80000007489959999.....EF6
Any ' ' or <> missing ?
Thanks.
John.

Offline

#7 2019-02-07 23:23:24

johnthewave
Contributor
Registered: 2014-10-10
Posts: 19

Re: cloning indala flexpass 224 onto ATA5577

Hello,
Could anyone tell me if the PROXMARK3 can clone a 224 bit indala card onto T5577 ? The wiki says 64 bits, and 84 bits. But not 224.
Thanks.
John

Offline

Board footer

Powered by FluxBB