Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-10-29 20:18:06

EgonSommer
Contributor
Registered: 2018-10-29
Posts: 1

new & already a problem

I have today unpacked the new Proxmark 3 RDV4 and wanted to install the current firmware. Unfortunately, it seems like something went wrong with the firmware update. I installed everything on my Kali Linux and started the update process via the "update script" from the repository (https://github.com/RfidResearchGroup/proxmark3).

After that I only saw the following in the shell.

~/proxmark3# ./update.sh
Waiting for Proxmark to appear...
Found proxmark on /dev/pm3-0

Loading ELF file bootrom/obj/bootrom.elf
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00000d48->0x00000d48) [R X] @0x298

Loading ELF file armsrc/obj/fullimage.elf
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x00037528->0x00037528) [R X] @0x94
1: V 0x00200000 P 0x00139528 (0x000012d4->0x000012d4) [RW ] @0x375bc
Note: Extending previous segment from 0x37528 to 0x387fc bytes

[+] Waiting for Proxmark to appear on /dev/pm3-0           
[=] UART Setting serial baudrate 460800
.Found
Entering bootloader...
(Press and release the button only to abort)
[+] Waiting for Proxmark to appear on /dev/pm3-0           
......................[=] UART Setting serial baudrate 460800
. Found

Flashing...
Writing segments for file: bootrom/obj/bootrom.elf
0x00100000..0x001001ff [0x200 / 1 blocks].OK
0x00100200..0x00100f47 [0xd48 / 7 blocks].......OK

Writing segments for file: armsrc/obj/fullimage.elf
0x00102000..0x0013a7fb [0x387fc / 452 blocks].....................................................Waiting for a response from the proxmark...         
You can cancel this operation by pressing the pm3 button



After that the Proxmark does not boot anymore. What else can I do ?
Thanks in advance!

Offline

#2 2018-10-30 05:07:24

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: new & already a problem

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

This is the introduction,  no place for questions.


but Kali users has troubles,  most likely the modemanager spooking.. https://github.com/RfidResearchGroup/pr … /issues/35

Offline

Board footer

Powered by FluxBB