Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2018-05-10 00:23:21
- ATDT911
- Contributor
- Registered: 2018-04-01
- Posts: 3
mifare_autopwn script question
I am having an issue when I run this script, where it seems to be waiting for a card, even though the card is near the antenna. My computer fans spin up so I thought maybe something was happening, but it just sits there.
pm3 --> s r mifare_autopwn
[+] Executing: mifare_autopwn.lua, args ''
Waiting for card or press any key to stop
Card found, darkside attack useless PRNG hardend on UID FD785720
Waiting for card or press any key to stop
Proxmark3 RFID instrument
[ ARM ]
bootrom: iceman/master/ice_v3.1.0-864-g99d7546 2018-05-09 15:55:09
os: iceman/master/ice_v3.1.0-864-g99d7546 2018-05-09 15:55:10
[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2017/11/10 at 19:24:16
[ Hardware ]
--= uC: AT91SAM7S512 Rev B
--= Embedded Processor: ARM7TDMI
--= Nonvolatile Program Memory Size: 512K bytes, Used: 239496 bytes (46%) Free: 284792 bytes (54%)
--= Second Nonvolatile Program Memory Size: None
--= Internal SRAM Size: 64K bytes
--= Architecture Identifier: AT91SAM7Sxx Series
--= Nonvolatile Program Memory Type: Embedded Flash Memory
Offline
#2 2018-05-10 06:57:41
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: mifare_autopwn script question
Missing a dot, I see. The message should have been understandable anyway but no, you can't use darkside attack against your card.
Card found, darkside attack useless. PRNG hardend on UID FD785720
Offline
#3 2018-05-10 08:09:38
- ATDT911
- Contributor
- Registered: 2018-04-01
- Posts: 3
Re: mifare_autopwn script question
I see, I guess because it didn't exit, I assumed it was doing more. Top also shows the proxmark3 process as using 100% cpu.
I am trying to find the key for 6 blocks on a 1k classic card. I have all the other keys, but not those.
Offline
#4 2018-05-10 08:17:05
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: mifare_autopwn script question
it is doing more, its continuosly scans for a new card...
Waiting for card or press any key to stop
Offline
Pages: 1