Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi everybody,
after successfully testing my new proxmark for some days, i tried to simulate a mifare classic card to a Assa Abloy Aperio door lock.
While a normal mifare classic card is working, the proxmark is not working at all. The door lock does not even "see" the card, otherwise you would see a led flashing
(btw. just the UID is read from the card.)
I have an original Proxmark HF Antenna. Normal wallmounted access readers are working perfect.
What could be the reason for this? Should i try an other antenne?
Any suggestions?
Kind regards,
Joerg
Offline
UPDATE:
After trying hours after hours a found out that the normal 14a simulate command works well.
So this is not working: hf mf sim u e1e2e3e4 i
not even with a acr122 reader
This is working: hf 14a sim 1 e1e2e3e4
even with ACR-reader and door lock.
What am i doing wrong? (is mifare sim in this version broken) ?
My hw version:
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 0 2014-04-01 12:12:24
#db# os: svn 0 2014-04-01 12:12:24
#db# FPGA image built on 2014/03/24 at 21:54:44
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3>
Offline