Proxmark3 community

xugmu

Contributor

Registered: 2016-06-22

Posts: 24

Many problems with my proxmark

Yesterday I received the proxmark and all I've gotten has been that the relay and some other LED (green LED) is rhythmically activated every 15 or 20 seconds

I read a few manuals but I do not have clear

I think I've managed to change the boot to CDC

I thought it might be easier to use a JTAG interface, I have one with a chip 74hc244n but not if if it or use that program to upload the file s19

I am using Windows XP

My encounter with the proxmark definitely has not been a love at first sight

I have a bit of a hurry because I have a key that need to clone T5577

Thanks to everybody 

iceman

Administrator

Registered: 2013-04-25

Posts: 9,506

Website

Re: Many problems with my proxmark

When you flashed the latest bootrom to the device,   you need to flash the fullimage.elf using the new flasher.

xugmu

Contributor

Registered: 2016-06-22

Posts: 24

Re: Many problems with my proxmark

I'm having a lot of problems trying to flashing the fullimage.elf.The flasher  stops  and do nothing

I have installed tortoisesvn but I get the error:  "unable  to conect  to a  repository" when I try to update files

maybe update files can be a good option

thank you

Last edited by xugmu (2016-06-30 09:28:30)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,506

Website

Re: Many problems with my proxmark

We don't use SVN or GoogleCode since many years.   The latest source code is located on GitHub.

xugmu

Contributor

Registered: 2016-06-22

Posts: 24

Re: Many problems with my proxmark

Windows only recognizes the proxmark  when I have the button pressed , when it  is released  the proxmark disappears from device manager and then have to reinstall the driver again

I think the first thing I have to do is install the driver well

thank  you

Last edited by xugmu (2016-06-30 10:54:16)

iceman

Administrator

Registered: 2013-04-25

Posts: 9,506

Website

Re: Many problems with my proxmark

Its been mentioned on the forum several times,  you need a new fullimage if you updated the bootrom.  get the latest source from github and compile it.

then unconnected pm3,  press button, keep it pressed,  connect to computer w usb,  while pressing re-flash fullimage,  release button. its a one-hand operation.

xugmu

Contributor

Registered: 2016-06-22

Posts: 24

Re: Many problems with my proxmark

all files I'm using come from  "pm3-bin-756"

What catches my attention is that the flashers expect to proxmarx into a USB port

and the device manager installs me in a com port, sometimes COM11 sometimes another

The flasher waits but does nothing

I tried with two drivers :  proxmark3.inf  and libusb-win32 (old USB interface)

thank you

Last edited by xugmu (2016-06-30 12:58:49)

xugmu

Contributor

Registered: 2016-06-22

Posts: 24

Re: Many problems with my proxmark

24 hours later I still can not communicate with the proxmark

I have an explanation, perhaps the flasher does not know the com port and I tell him there somehow

otherwise I think it could be directly use the jtag

maybe I damaged the boot and so the flasher does not recognize it as a USB device

Last edited by xugmu (2016-06-30 21:25:07)

somemadeupname

Contributor

From: Western Australia

Registered: 2016-05-25

Posts: 19

Re: Many problems with my proxmark

Going by https://github.com/Proxmark/proxmark3/wiki/Windows

you will need to edit (righ-click -> ”Edit”) the following batch you can find under “win32” folder:

            FLASH - Bootrom.bat

            FLASH - FPGA fullimage.bat

            FLASH - OS.bat

In those files you need to change the com port number after the “flasher.exe” according to YOUR Proxmark3 current port number !

You will now be able to flash bootloader, OS image and FPGA without holding down the Proxmark3 button !

xugmu

Contributor

Registered: 2016-06-22

Posts: 24

Re: Many problems with my proxmark

Ggooooooodddddd,everything is ok now

I had tried to do something similar before but was obsessed with the file " FLASH - NEW Bootrom (uses old flasher exe with -b option).bat" that curiously does not contain  the command "flasher.exe" .For that I could not edit

Thanks everyone for your help