Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-12-27 02:37:48

jdubansky
Member
Registered: 2014-12-27
Posts: 1

invalid serial port HID

hello! after working for a few hours to get everything to run properly and hitting many errors i decided to finally post: my problem is this:

[== Undefined ==]
[  785.881706] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:28:c6:8e:62:04:aa:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  794.296367] usb 2-1.1: USB disconnect, device number 12
[  796.298974] usb 2-1.1: new full-speed USB device number 13 using ehci-pci
[  796.371018] usb 2-1.1: device descriptor read/64, error -32
[  796.547125] usb 2-1.1: device descriptor read/64, error -32
[  797.079390] usb 2-1.1: new full-speed USB device number 15 using ehci-pci
[  802.175834] usb 2-1.1: New USB device found, idVendor=9ac4, idProduct=4b8f
[  802.175843] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  802.175849] usb 2-1.1: Product: ProxMark-3 RFID Instrument
[  802.175853] usb 2-1.1: Manufacturer: J. Westhues
[  802.175858] usb 2-1.1: SerialNumber: ChangeMe
[  802.177972] hid-generic 0003:9AC4:4B8F.0007: hiddev0,hidraw2: USB HID v1.00 Device [J. Westhues ProxMark-3 RFID Instrument] on usb-0000:00:1d.0-1.1/input0
[  810.270456] [UFW BLOCK] IN=wlan0 OUT= MAC=01:00:5e:00:00:01:70:cd:60:f2:65:ae:08:00 SRC=192.168.0.13 DST=224.0.0.1 LEN=44 TOS=0x00 PREC=0x00 TTL=1 ID=60702 PROTO=UDP SPT=61363 DPT=8612 LEN=24 
jd@JDPC:~/tools/pm3/client$ ./proxmark3 /dev/hidraw2
ERROR: invalid serial port
proxmark3> quit

followed this tutoiral: https://code.google.com/p/proxmark3/wiki/Linux

also tried my VM box but had more issues there.

Offline

#2 2014-12-27 16:13:51

midnitesnake
Contributor
Registered: 2012-05-11
Posts: 151

Re: invalid serial port HID

This is the old HID version of the boot loader.  The updated version acts as a USB CDC/tty device usually ttyACM0.

This is a decent blog post that sums up the actions you need to perform to update your proxmark3 : http://www.rajatswarup.com/blog/2014/07/22/proxmark3-installation-on-kali/

Offline

#3 2015-10-29 22:17:20

ch3rish
Contributor
Registered: 2015-10-29
Posts: 2

Re: invalid serial port HID

midnitesnake wrote:

This is the old HID version of the boot loader.  The updated version acts as a USB CDC/tty device usually ttyACM0.

This is a decent blog post that sums up the actions you need to perform to update your proxmark3 : http://www.rajatswarup.com/blog/2014/07/22/proxmark3-installation-on-kali/

hi
may i ask?
is it the only way to use Proxmark3 on linux?
Mine is still HID device.
Is there a port for HID device?

thanks smile

Offline

#4 2015-10-30 23:30:53

meter
Contributor
Registered: 2015-07-13
Posts: 77

Re: invalid serial port HID

I don't understand which is your problem, you can upgrade to latest version from github with hid-flasher.
You can find it in client/hid-flasher/

Offline

Board footer

Powered by FluxBB