Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2017-02-11 00:06:37

Charlie
Contributor
Registered: 2017-01-27
Posts: 116

firmware and compiling update

Hi,

I think I followed all the correct procedures in the Proxmark3 wiki about updating the firmware. I was wondering if someone can confirm that everything look correct and up todate.


Prox/RFID mark3 RFID instrument         
bootrom: master/v2.2.0-282-g3e50af4-dirty-suspect 2017-02-09 10:32:26
os: master/v2.2.0-282-g3e50af4-dirty-suspect 2017-02-09 10:32:30
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
uC: AT91SAM7S512 Rev B         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 512K bytes. Used: 189121 bytes (36%). Free: 335167 bytes (64%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory         


proxmark3> hw tune
Measuring antenna characteristics, please wait...#db# DownloadFPGA(len: 42096)         
....         
# LF antenna: 35.61 V @   125.00 kHz         
# LF antenna: 28.46 V @   134.00 kHz         
# LF optimal: 39.88 V @   127.66 kHz         
# HF antenna: 27.19 V @    13.56 MHz         
Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.
proxmark3>


I appreciate the help, thanks!

Offline

#2 2017-02-15 14:16:30

Danz
Contributor
From: Dubai
Registered: 2015-10-24
Posts: 98

Re: firmware and compiling update

Correct smile


ModHex(hfdudthbfchtiehuduhehvht)

Offline

#3 2017-02-16 19:06:56

Charlie
Contributor
Registered: 2017-01-27
Posts: 116

Re: firmware and compiling update

Thanks!

Offline

Board footer

Powered by FluxBB