Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-09-24 04:45:13

toorc
Member
Registered: 2015-09-24
Posts: 3

CDC:Problem flashing fullimage

Hello,
     
    I just used my proxmark3 with version r834 for a week.
    I got proxmark3 project from github,and added some logs on loacal computer. I used ProxSpace-130613 and builded armsrc. I found fullimage.elf/s19 in the folder: /armsrc/obj,but there was no rules to build osimage.elf/s19 in Makefile。So I can not get osimage.elf.
    I ran Flash - FPGA fullimage.bat in pm3-bin-848\win32(clinet+GUI) to flash my fullimage.elf to the hardware. After doing that,I dettached and attached proxmark3 to PC with USB port,but my computer can not recognise it until I recoverd bootrom r848 by JTAG。

    So My problems are:
    What is the difference between fullimage.elf and osimage.elf+fpgaimage.elf?
    When I modified my code in armsrc, how can I flash it to proxmark3. Just build fullimage.elf and flashing it?
    It seens that bootrom was corrupted after I flashed my fullimage.elf,why?

Offline

#2 2015-09-24 10:04:53

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: CDC:Problem flashing fullimage

Please download and compile latest sourcecode from GitHub,  there you will need to flash bootrom first, then fullimage.
The latest is v2.2.0

Last edited by iceman (2015-09-24 11:56:55)

Offline

#3 2015-09-24 11:34:24

toorc
Member
Registered: 2015-09-24
Posts: 3

Re: CDC:Problem flashing fullimage

iceman wrote:

Please download and compile lastest sourcecode from GitHub,  there you will need to flash bootrom first, then fullimage.
The latest is v2.2.0

Thanks. I will have a try.

Offline

#4 2015-10-09 05:10:59

toorc
Member
Registered: 2015-09-24
Posts: 3

Re: CDC:Problem flashing fullimage

toorc wrote:
iceman wrote:

Please download and compile lastest sourcecode from GitHub,  there you will need to flash bootrom first, then fullimage.
The latest is v2.2.0

Thanks. I will have a try.

It was really worked!!!

I builded bootrom with latest devkitARM,used JTAG to flash bootrom.s19.
Then I flashed fullimage with flasher.exe.

Offline

#5 2015-10-09 08:33:07

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: CDC:Problem flashing fullimage

Glad to hear.

Offline

Board footer

Powered by FluxBB